|
COPPER STRIP
Manufacturing Range
|
Thickness(mm) |
Width (mm) |
Temper |
Internal Diameter
|
|
0.045 - 0.10 |
8 - 600 |
|
Annealed O |
|
Quarter Hard HA |
|
Half Hard HB |
|
Hard HD |
|
Depending on thickness will
be 150mm - 500mm
|
|
0.1 - 0.3 |
8 - 600 |
|
0.3 - 1.0 |
8 - 660 |
|
1.0 - 6.0 |
20 - 660 |
|
6 and 7 |
660 |
|
8 - 12 |
660 |
1.
Width of only 10 mm, is also
possible, soft temper copper with 6
mm in thickness is available.
2. Only cold rolled without
degreasing.
3. Hot rolling grode with oxide
scale.
Internal dia. of coils, depending on
thickness, will be 300/500 mm.
NOTE 1 : Small crack edge may
occur when the width of strip is 660
mm.
NOTE 2 : If the chosen width
is 660 mm, then the width Tol . will
be 5 mm.
NOTE 3 : Radiator strip
available with 0.045 and cosn alloy.
Packing : in wooden boxes,
semi-wooden boxes or as per customer
request
COPPER SHEET
Manufacturing Range
Sheet
Dimensions for Electrolytic Copper
|
Thickness |
Width (mm) |
Length (mm) |
Temper |
|
0.30 - 1.0 |
600 - 660 |
70 - 2000 |
|
Annealed O |
|
Quarter Hard HA |
|
Half Hard HB |
|
Hard HD |
|
|
1.0 - 6.0 (1) |
600 - 660 |
500 - 2000 |
|
8 - 127 (2) |
600 - 660 |
500 - 3500 |
1.
Soft temper copper with 6 mm in
thickness is available. Also only
cold rolled temper is possible
2. Hot rolling grade with oxide
scale
NOTE 1 : Small crak edge may
occur when the width of sheet is 660
mm.
NOTE 2 : If the chosen width
is 660 mm, then the width Tol. Will
be + 5 mm
NOTE 3 : Width Tol.for 600
until 660 will be +1 mm
Packing : in wooden boxes with
out paper interleaving |
